14 Best Shaft Collar With Keyway

A quote you might find interesting:

“Actually, I do happen to resemble a hallucination. Kindly note my silhouette in the moonlight.” The cat climbed into the shaft of moonlight and wanted to keep talking but was asked to be quiet. “Very well, I shall be silent,” he replied, “I shall be a silent hallucination.”
― Mikhail Bulgakov, The Master and Margarita


Looking for something interesting? Here are 11 Best Feet Warmers.

Top 14 Shaft Collar With Keyway

1
Climax Part RC062KW4H ( OD, 2 Inch Length, 5/16-18 X 5/16 Set Screw)
Product Highlights:
  • provides torque transmision and alignment
  • cost effective coupling design
  • easily installed where major disassembly would otherwise be required
2
Climax Metal 2C062KW TwoPiece ( Steel, 5/8" Bore, 1-5/16" OD, 7/16" Width)
Product Highlights:
  • two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
  • keyway for use on keyed shafts
  • steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
3
Ruland SPK16SS TwoPiece Clamping ( 3/4" OD, 1/2" Width, 1/4" Keyway Width)
Product Highlights:
  • two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
  • keyway for use on keyed shafts
  • stainless steel 303 for greater corrosion resistance than steel or aluminum
4
Climax Metal C100KW Set ( 1-1/2" OD, With 5/16-24 X 1/4 Set Screw)
Product Highlights:
  • setscrew shaft collar for applications supporting low axial loads and simple positioning
  • keyway for use on keyed shafts
  • steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
5
Lovejoy LSC8 Shaft Collar ( Bore, 1" OD, 7/16" Width)
Product Highlights:
  • setscrew shaft collar for applications supporting low axial loads and simple positioning
  • effective on shafts made of softer material than the setscrew material
  • steel for weldability and rust resistance with zinc plating for better resistance to corrosion than black oxide steel
6
Climax Part ISCC075075KW Mild ( 2 1/4 Inch Length, 1/4-28 X 5/8 Clamp Screw)
Product Highlights:
  • effective on hard and soft shafts
  • design fully engages the shaft without marring
  • high axial load and torque capacity
7
Ruland SPK10SS TwoPiece Clamping ( 5/16" OD, 7/16" Width, 3/16" Keyway Width)
Product Highlights:
  • two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
  • keyway for use on keyed shafts
  • stainless steel 303 for greater corrosion resistance than steel or aluminum
8
Climax Metal 2C100KW TwoPiece ( Steel, 1" Bore, 1-3/4" OD, 1/2" Width)
Product Highlights:
  • two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
  • keyway for use on keyed shafts
  • steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
9
Climax Part RC100KW4H ( Inch Length, 5/16-18 X 1/2 Set Screw)
Product Highlights:
  • provides torque transmision and alignment
  • cost effective coupling design
  • easily installed where major disassembly would otherwise be required
10
Climax Part RC075KW Mild ( OD, 2 Inch Length, 5/16-18 X 3/8 Set Screw)
Product Highlights:
  • provides torque transmision and alignment
  • cost effective coupling design
  • easily installed where major disassembly would otherwise be required
11
Ruland SPK28F 1215 LeadFree ( 3/4" OD, 1.7500" Bore, 3/8" Keyway)
Product Highlights:
  • ruland shaft collars have tightly controlled face to bore perpendicularity (tir of < 0.002") for proper alignment of mating components
  • bore size and ruland name stamped on every shaft collar for ease of identification
  • two-piece styles are mated throughout the manufacturing process for proper fit and alignment
12
Climax Metal 2C075KW TwoPiece ( Steel, 3/4" Bore, 1-1/2" OD, 1/2" Width)
Product Highlights:
  • two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
  • keyway for use on keyed shafts
  • steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
13
Ruland SPK12A TwoPiece Clamping ( OD, 1/2" Width, 3/16" Keyway Width)
Product Highlights:
  • two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
  • keyway for use on keyed shafts
  • aluminum for resisting corrosion and tarnishing
14
Climax Part RC100KW4H ( Inch Length, 5/16-18 X 1/2 Set Screw)
Product Highlights:
  • provides torque transmision and alignment
  • cost effective coupling design
  • easily installed where major disassembly would otherwise be required

You might also be interested in the following guides :

Resources

Neil Trevor

Neil loves to travel. Whenever he finds some time to take a break in a cafe, he loves to sit down, sip a cup of cappuccino and write. Chief travel editor at WhatRocksAndWhatSucks.com, right now Neil probably is somewhere in Europe (or in South America, who knows!). Reach him at neil@wraws.com or on WhatRocksandWhatSucks.com.