8 Best Miter Saw For Crafts

A quote you might find interesting:

“Trains are great dirty smoky things,” said Will. “You won’t like it.”
Tessa was unmoved. “I won’t know if I like it until I try it, will I?”
“I’ve never swum naked in the Thames before, but I know I wouldn’t like it.”
“But think how entertaining for sightseers,” said Tessa, and she saw Jem duck his head to hide the quick flash of his grin.”
― Cassandra Clare, Clockwork Prince

You might also be interested in 12 Best Cordless Drill Greenworks.

Top 8 Miter Saw For Crafts

1
Hercules Mini Benchtop CutOff ( Crafts (Mini Cut-Off Saw))
Product Highlights:
  • cuts wood, brass & similar light materials with smooth, precise cuts; no sanding needed!
  • cuts to a depth of 1/2 in. - ideal for frames and molding
  • make miter cuts from 0° to 45°
2
TruePower 919 High Speed ( 2-Inch (colors May Vary))
Product Highlights:
  • precise smooth cuts on wood, plastic, soft metals (aluminum, copper, brass)
  • cutting dept: 1/2 inch
  • 7800 rpm speed
3
YaeTek Mini Benchtop CutOff ( Bench Top DIY - 110V 1/2" Cut Depth)
Product Highlights:
  • cuts wood, brass & similar light materials with smooth, precise cuts; no sanding needed!
  • cuts to a depth of 1/2 in. - ideal for frames and molding
  • make miter cuts from 0° to 45°
4
Midwest Products Hobby ( Miter Box Deluxe)
Product Highlights:
  • unlike other typical miter boxes, you can cut four miter angles in addition to a 90 degree angle
  • injection molded with unique cam clamps the hold the material firmly in place
  • accepts materials up to two-inch wide and as thick as 1/2-inch
5
Olson Saw 35241 Fine ( Angles 30, 45, 90, Cutting Depth 7/8-Inch)
Product Highlights:
  • deluxe fine kerf saw
  • with aluminum thin slot miter box
  • for accurate cuts in materials 7/8″ thick or less
6
Proxxon 37160 KGS 80 ( MICRO Chop Saw)
Product Highlights:
  • 100-120v ac 200w, 50/60 hz, 4000 rpm, powerful quiet motor
  • 3-1/8" 24 tooth carbide tipped blade with polycarbonate protection; cover automatically swings up for safe operation
  • 45° miter cuts in both directions and positive stops at 15° intervals
7
Rockwell BladeRunner X2 Portable ( Gauge, And 7 Accessories - RK7323)
Product Highlights:
  • portable tabletop saw sets up in seconds to cut wood, metal, tile, aluminum and plastic - performs rip, scroll, miter, and inside cuts
  • compact and portable with built-in tabletop handle to carry anywhere ­- weighs in at less than 15 pounds. no-load speed - 3000/minute. the bladerunner x2 cuts a variety of materials depending on the type of blade you're using. pick the blade that best suits the job, from scroll cutting, to rip cuts, the bladerunner's cutting capacity will vary depending on the material wood- 1-1/2 inch. pvc pipe- 1-1/4 inch. aluminum- 3/8 inch. steel- 1/8 inch. ceramic- 3/8 inch
  • hold-down guard and splitter cuts wider material, and a larger rip fence for better control and a nice, accurate cut. table size- 15-3/4 x 17 inches

You might also be interested in the following guides :

Further Reading

Pete Evans

Pete Evans is an IT technician by day who enjoys reading, writing, vandalizing kitchen counter and badminton. He is smart and energetic, but can also be very lazy (especially around mornings) and a bit standoffish. He is obsessed with over-knee socks. Physically, Pete is in pretty good shape. He is average-height with bronze skin, mouse hair and green eyes. Unusually, he has a prosthetic arm; a lion ate his. You can reach him via email at pete@wraws.com